联系我们

    保定永久路沿石模具厂
    联系人:薛经理
    电 话 :0312-6399288
    手 机 :15233728688
    传 真 :0312-6399288
    网 址 :www.luyanshimoju88.com
    地 址 : 地址:河北省保定市城东工业区

企业新闻

路沿石钢模具有效又便利的清理方法

路沿石钢模具本身是由钢材生产而成的,作用是隔开机动车和我们日常的行走,由于路沿石是水泥制作出来的,因此自身强度有很大保障,路沿石模具根据材质不同分为塑料和钢板等。
The road edge stone steel mold itself is made of steel, which is used to separate motor vehicles from our daily walking. Because the road edge stone is made of cement, its own strength is greatly guaranteed. According to the different materials, the road edge stone mold is divided into plastic and steel plate, etc.

路沿石钢模具的售卖量非常好,但是很多客户都会反映一个问题,就是路沿石钢模具在使用后需要清理,需要一个既有效又便利的清理方法,对于这种问题我们通过跟技术人员的研究,找到了一些方法,希望对客户有所帮助。
The sales volume of roadside stone steel mold is very good, but many customers will reflect a problem, that is, the road edge stone steel mold needs to be cleaned after use, which requires an effective and convenient cleaning method. For this problem, we have found some methods through the research with technical personnel, hoping to help customers.

        

路沿石钢模具的主要材质是钢铁板,清理时要用高压水将砂砾彻底清洗干净,下面就是一个干燥的问题,我们在清洗后一定要注意,一定要把水擦干净,放于通风干燥处,如果上面留下水迹,就会长锈长斑。
The main material of the road edge stone steel mold is steel plate. When cleaning, the gravel should be thoroughly cleaned with high-pressure water. The following is a drying problem. We must pay attention to after cleaning. We must wipe the water clean and put it in a ventilated and dry place. If there is water mark on it, it will grow rust spots.

干燥后建议涂抹上一层费油,这样既有利于钢模具的保护,而且在下次生产的时候,还利于脱模,生产出来的产品,表层也会更加的光滑。
After drying, it is recommended to apply a layer of waste oil, which is beneficial to the protection of steel mould and demoulding in the next production. The surface of the product produced will be smoother.